Casio PA-2400W Especificaciones descargar pdf (Pagina 40)

13. Restrictions with PA-2400W

The followings are restriction and limitation that user of the PA-2400W may encounter while operating. The

user must always be aware of them. Countermeasure against each restriction is also described for your

reference.

Compatibility of application software under Windows CE ver. 2.00 and ver. 2.11

Neither Microsoft nor CASIO assure you compatibility of application software. In other words, an

application software which can perfectly run the Windows CE version 2.00 may not necessarily run the

version 2.11, and vice versa.

Abrupt reset

While operating the PA-2400W, an abrupt reset may occur once in a while which can cause data and

program to be erased. All data and program are recommended to back up periodically to compact flash

card or PC card.

Locking during warm-bootup

While the PA-2400W is warm-booted up, the system may lock once in a while. Just push the RESET

switch at the back to unlock the condition if occurred.

Irregular IrDA communication

Because of IrDA specifications of a target device, communication via IrDA interface between the PA-

2400W and the target device cannot be possible. In such case, it is often caused by deviated specifications

of IrDA interface of the device from that of the PA-2400W. Make sure first all the IrDA specifications

of the PA-2400W and the device.

Life of battery

Temperature and humidity surrounding the PA-2400W can affect the duration of battery life. If

temperature and humidity are high, the life of battery becomes shorter than that of originally specified

duration and consequently it causes the low battery warning message to appear earlier. When such the

message appears, stop operation and recharge the battery immediately. Also, the AC adaptor (model; AD-

C50200-S) to power the PA-2400W is recommended for any operation with device(s) being connected

that consume heavy amount of current.

PCMCIA card

The limited amount of current that can be consumed by PCMCIA card is 300 mA or less. Any PCMCIA

card with requirement of 300 mA or over as its power to operate must not be used with the PA-2400W.

The low battery warning message appears in early stage or the PA-2400W itself locks abruptly if such a

card is installed. CASIO recommends you to use one of the PCMCIA cards listed on page 7 in the PA-

2400W Hardware Manual.

1 2 ... 35 36 37 38 39 40

Sin comentarios

Casio PA-2400W Especificaciones Pagina 40