Casio PA-2400W Especificaciones descargar pdf (Pagina 20)

4.7 Remaining Battery Voltage Indication

The remaining battery voltage can be displayed if the Power Management icon or Battery icon is touched on the

Control Panel.

Fig. 4.6 Battery property display screen

Note:

The "LOW" indication also appears if a VDET1 event occurs, even if it occurs when the backlight is on. If the

voltage is "Low" or "Very Low" the backlight can not be restored to ON. If the battery condition is reset by

turning the power on and off, the "LOW" indication will be canceled.

4.8 Recharging and Power Supply

The main battery (lithium-ion battery pack) can be recharged in three ways as follows:

Replace with a fully charged lithium-ion battery pack. Remove the battery pack and charge it using the

battery charger (PA-2040DCHG-E).

Set the battery pack in the PA-2400W, then mount the PA-2400W on the I/O Box to charge the battery

pack..

Retain the battery pack in place of the PA-2400W, then connect the AC adaptor (AD-C50200U-S for

AC input 120V or AD-C50200G-S for AC input 230V) to the PA-2400W.

Data security at battery replacement is described below.

As long as either the main battery or sub-battery is installed, the data in Object Store is retained.

Table 4.2 Data security depending on battery presence

Installed battery Data in Object Store

Main and sub-batteries Retained

Only main battery Retained

Only sub-battery Retained

No battery Can not be retained

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 39 40

Sin comentarios

Casio PA-2400W Especificaciones Pagina 20