Casio KL-8100 Guía de usuario descargar pdf (Pagina 30)

Printing

• This application does not support printing on 6mm wide tape.

• Make sure the KL-8100 is connected correctly to your computer.

• Check to make sure that none of the text or graphics in your layout fall outside the print area, which is indicated by a dotted line on the layout

window. Also, confirm that the tape width you specified with this application matches the width of the tape loaded in the printer.

Printing Precautions

• Printing for a long time with a layout that is wider than the tape loaded in the

KL-8100 can cause print quality to deteriorate and cause tape jamming, which can damage the KL-8100. Always make sure that your layout fits

within the width of the tape you are using.

• Check the instructions that come with the tape cartridge for possible special instructions concerning KL-8100 density settings.

• With the KL-8100, a very high density setting may cause printing to become dim. See the User’s Manual that comes with the KL-8100 for details.

Setting Up the KL-8100 for Printing

1. Press the KL-8100’s [ON] button to turn it on.

2. Press the KL-8100’s [COMPUTER LINK] button.

3. Use the procedures described in the User’s Guide that comes with the KL-8100 to put it into the data communication mode.

• The data communication mode is indicated when the ”READY!” message is on the screen of the KL-8100.

Important!

• Start the print operation on your computer within about 20 seconds after the ”Prepare EZ-LABEL PRINTER to READY!” message appears on

the KL-8100’s display. If you don’t, a communication error will occur on the printer. Press the printer’s [ESC] button to clear the error.

Setting Up Your computer for Printing

1. On the [File] menu, click [Print] to display the [Print Setup] dialog box.

• You can also display this dialog box by clicking the icon.

2. Use the [Port] radio buttons to specify to which of the ports of your PC the KL-8100 is connected.

3. Use the [Number of Copies] text box or up and down buttons to specify how many copies of the layout you want to print.

• If you made a number of pieces setting in the new layout dialog box when creating a ”Free Setting” layout (page E-14), you should also specify the

number of pieces here for printing.

• You can specify up to 100 copies.

• Note that the tape length cannot exceed 8 meters.

4. Click the [Mirror Printing] checkbox to turn mirror printing on (checked) and off (unchecked).

• Mirror printing reverses the printed data, making it appear like it is reflected in a mirror.

5. After checking to make sure that all the settings are as you want, click [OK] and a message appears to confirm whether you actually want to print.

6. Check your settings and that the ”Prepare EZ-LABEL PRINTER to receive. OK?” message is on the KL-8100’s screen, and then click [OK].

• You can abort the print operation by clicking [Cancel].

• When your are outputting your layout to multiple pieces of tape, the message ”1-line printing complete. Cut tape.” appears after printing of each tape

is complete. Cut the tape and click [OK].

• After you print a layout on multiple pieces of tape, you can assemble the tape to create the finished image. See ”Hints for Producing Output Wider

Than the Tape Width” on page E-36 for details.

Merge Printing

See ”Merge Printing” on page E-27 for a detailed description of merge printing.

1. On the [File] menu, click [Merge Print] to display the merge print setup window.

2. Specify the start record and end record.

• Input a value directly into the [Records] text box or the up and down buttons to change this setting.

3. Perform steps 2 through 6 under ”Printing” on page E-34.

• Use the following procedure when you want to print a single record.

(1) Display the layout window for the record you want to print. See ”Displaying a Record in the Layout Window” on page E-30.

(2) Perform the normal print operation. See ”Printing” on page E-34.

1 2 ... 25 26 27 28 29 30 31 32 33

Comentarios a estos manuales

Sin comentarios

Casio KL-8100 Guía de usuario Pagina 30

Comentarios a estos manuales

Relacionado con productos y manuales para Impresión y escaneo Casio KL-8100