Casio EX-ZR1000 Guía de usuario descargar pdf (Pagina 42)

Snapshot Tutorial

IMPORTANT!

• In the S mode, ISO sensitivity (page 51) always operates according to its “Auto”

setting. The ISO sensitivity setting cannot be changed while in the S mode.

• The flash > (Auto Flash) and ¥ (Red Eye Reduction) flash modes are not

supported while A, S, or M is selected for the recording mode. If you want the flash

to fire, select < (Flash On) as the flash mode.

• The displayed ISO sensitivity, shutter speed or aperture value will turn red when

you half-press the shutter button if the image is overexposed or underexposed.

M M (Manual Exposure) mode

This mode gives you total control over aperture and shutter speed settings.

Press [SET] to open the Control Panel.

Use [8] and [2] to select

(aperture), and then press [SET].

Use [8] and [2] to change the aperture setting, and then press [SET].

Use [8] and [2] to select

(shutter speed), and then press [SET].

Use [8] and [2] to change the shutter speed setting, and then press [SET].

S S (Shutter Speed Priority) mode

In this mode, you select the shutter speed and other settings are adjusted

accordingly.

Press [SET] to open the Control Panel.

Use [8] and [2] to select

(shutter speed), and then press [SET].

Use [8] and [2] to change the shutter speed setting, and then press [SET].

• You also can select the EV shift setting located under the shutter speed

setting and then specify an exposure value (EV shift), if you want.

A A (Aperture Priority) mode

In this mode, you select the aperture and other settings are adjusted

accordingly.

Press [SET] to open the Control Panel.

Use [8] and [2] to select

(aperture), and then press [SET].

Use [8] and [2] to change the aperture setting, and then press [SET].

• You also can select the EV shift setting located under the aperture setting

and then specify an exposure value (EV shift), if you want.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 206 207

Sin comentarios

Casio EX-ZR1000 Guía de usuario Pagina 42