Casio IT-2000 Manual de usuario

IT-2000I/O Box InstallationManual(Version 1.00 )April 1998Casio Computer Co., Ltd.Copyright ©1998. All rights reserved

10Make sure that the POWER switch of the I/O Box is set to OFF. Set the DIP switch of thefirst I/O Box to be connected to the PC directly as follows.1

112.3.2 Setup of Master I/O BoxNote that the DIP switch settings of the Master I/O Box differ depending on whether thesystem configuration is consi

12Power SCSI termination 10Supplies power ONDoes not supply power OFF Connect the first I/O Box and PC with the SCSI cable.Then connect the SCSI co

132.3.4 Setup of PCConnectionIf using the Satellite I/O Box, plug the connection cable into the COM port of the PC.If using the Master I/O Box, plug

14Environment SetupIf the I/O Box to be connected to the PC is a Satellite I/O Box, select "RS-232C" from the"Configure" menu of t

153. Operation MethodAfter connecting the necessary system devices and installing the software on the PC, perform fileupload/download with the follow

16 Set any "Options" item, if necessary. Set the "Mode" option, if necessary. Click on the [OK] button.If preparation has

173.1.2 Specifying Files from IT-2000Operation on PCStart up the Upload/Download Utility on the PC and select "Link Manager Start" from t

18FLINK.DLL of Windows 3.1 version Start up Windows 3.1. Start up FLINK with the appropriate parameters.DoFLINK ( argc, argv )argc = 4;argv[ ]=

193.2 File DownloadTransfer files from the PC to the IT-2000.There are two methods for specifying the files to be downloaded: specifying files from t

2Table of ContentsChapter1 Overview 3Chapter2 System Configuration and Installation Method 42.1 Options and Software 42.2 System Configuration 52.2.1

20Operation on IT-2000FLINK.EXE of MS-DOS version Start up MS-DOS. Start up FLINK without adding any parameters. "Wait..." is displ

213.2.2 Specifying Files from IT-2000Operation on PCStart up the Upload/Download Utility on the PC and select "Link Manager Start" from t

22FLINK.DLL of Windows 3.1 version Start up Windows3.1. Start up FLINK with the receive mode option.DoFLINK ( argc, argv )argc = 4;argv[ ]= { &qu

234. Error Codes and Error MessagesAny termination codes and error information generated by the PC will be recorded in the error logfile on the PC.

24Error Code Error Message Description RemedyCateg. Detai0x00 0x00 NormalEndingNormal end. -0xDC 0x00 ADriveFormatNoticeFormat notification of drive

25Error CodecategDetaiError Message Description Remedy0x040x00ReadOnlyFileAccessError Write is specified to read-only-file. Change the file attributio

265. Q and ACommon to Satellite and Master I/O BoxesQ1It seems that it takes a rather long time for communication to start, doesn't it?A1Commu

27Q2If the Windows3.1 version of FLINK is used, the baud rate setup cannot be modified by changingthe DIP switch setting for the RS-232C communication

28Q2What is the maximum baud rate if the Satellite I/O Boxes are connected under daisy-chain so theyfollow each Master I/O Box ?A2In this case the phy

296. Reference ManualsBesides this IT-2000 I/O Box Installation Manual, the following manuals are available for theIT-2000 system as application pr

31. OverviewThis system performs file transfer and other operations between the Casio Data Collection TerminalIT-2000 (hereinafter referred to as thi

307. List of SCSI Boards and SCSI CablesThe listed SCSI Boards and Cables below have been assessed for the operability with the IT-2000.Thus, they

31Appendix Installation Method of Upload/Download UtilityInstallationThe Upload/Download Utility software consists of the following software compon

42. System Configuration and Installation Method2.1 Options and SoftwareCategoryName Model RemarkHardwareSatellite I/O BoxMaster I/O BoxRS-232C

52.2 System ConfigurationThis system can be configured in various ways. See typical examples of the hardware configurationas below.2.2.1 With Sing

6SoftwareHardwarePC side IT-2000 sideSatellite I/O BoxRS-232C cableRS-422 cableIT-2000PCUpload/Download Utility FLINK of Windows3.1 version orFLINK of

7SoftwareHardwarePC side IT-2000 sideMaster I/O BoxSCSI cableIT-2000PCSCSI BoardUpload/Download Utility FLINK of Windows3.1 ver. orFLINK of MS-DOS ver

82.3 Installation MethodThis section describes the installation and setup procedures that must be performed before I/O Boxand PC operations are start

92.3.1 Setup of Satellite I/O BoxThe following paragraphs explain how to set up the Satellite I/O Box and Master I/O Box to beconnected to the PC.N