Casio E125 - Cassiopeia Color Pocket PC Manual de usuario Pagina 6

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 10
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 5
OSI SECURITY DEVICES
Overview
OSI
Wall Mount System Specifications
The OMNILOCK Wall Mount System is
in the true sense an Access Control
System.It works with any electrical or
electromechanical locking mechanism
and many electrical circuits.The Wall
Mount System provides all of the control
and audit functions of an extensive
keypad or card-reader hard-wired system.
It is surface-mounted to the wall with a
steel wall plate and operates a Form-C
latching relay that can be used for multiple applications.
The Wall Mount System is available as a Keypad-only OM100,
OM300,or OM500,as a Magnetic-card reader and keypad
OM2000,or as the new Proximity card/fob and keypad OP2000
system.
Housing: 7.45" H X 3.81" W X 2.34" D.
Battery Type: Four size AA 1.5 Volt Alkaline
Mounting: Base plate is fastened to a fixed location.
Housing mounts to the baseplate using a Medeco plug.
Control Relay: Latching-style low power Form-C relay
uses no power to remain indefinitely in the normally open
(Fail secure) or in the normally closed (Fail safe) position.
Accepts 12-24 volts DC/RMS voltages with maximum current
of 5 amps.
Finishes
Black
Grey (Standard)
Special finishes available.
Exit Device Operator Specifications
Bring the access control of the
OM100/300/500,OM2000 or OP2000
Series to doors equipped with exit
devices.Currently available to operate
Von Duprin 99 Series rim and 9927
surface vertical rod exit devices,these
rugged operators through bolt to the
exit device.Contact us for availability
of operators for other exit devices.
Capacity: 100,300,500 users with the OM100,300,500
Series or as OM2000 or OP2000.
Trim: SR – Standard.BRR & VN available.
Cylinder: Solid brass 6 pin cylinder with two brass keys.
Keyed 5 pin with Arrow ‘CS’keyway.
I/C Core: For use with 6 or 7 pin small format (best style)
cores (cores not included).
Handing: Reversible.
Door thickness range: 1-3/4-2" Standard.Other thickness
options available.
Size: 3.94" W X 11.20" H.
Finishes
626/Grey Standard
613
other finishes available
Certifications
Conforms to ANSI Standard 156.2,Series 4000,Grade 1
requirements.Conforms to Federal Spec:FFH106C,Type 161.
Lever handles comply with ADA requirements.Lockset listed
to UL standards for fire (90 minutes) by Underwriters
Laboratories Inc.
Toll Free:(800) 221-2052
Phone:(718) 622-8785
Fax:(718) 789-8346
http://www.mfsales.com
360
MA-111 OSI PGS 355-364 1/17/03 9:53 AM Page 6
Vista de pagina 5
1 2 3 4 5 6 7 8 9 10

Comentarios a estos manuales

Sin comentarios