Casio CTK-520L Manual de usuario Pagina 7

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 21
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 6
— 4 —
Pin No. Terminal In/Out Function
1 MA14 Out Address bus
2 MWEB Out Clock for LED latches
3 NCO Not used.
4 ~ 19 MA0 ~ MA13 Out Address bus
13 MRDB Out Read enable signal
17 MCSB Not used.
20 ~ 27 MD0 ~ MD7 In/Out Data bus
28, 29 NC1, NC2 Not used.
30 DGND In Ground (0 V) source
31 DVCC In +5 V source
32, 33 XTLO, XTLI In/Out 20 MHz clock input/output
34 NC3 Not used. Connected to ground.
35 RSTB In Reset signal input
36 P24/RXD Not used. Connected to +5 V.
37 P25/TXD Not used.
38 NMI In
Power ON signal input
39 APO Out APO (Auto Power Off) signal output
40 NC4 Not used.
41 REFH Out Terminal for the internal DAC
42, 43 NC5, NC6 Not used.
44 DAOR Out Right channel sound waveform output
45 NC7 Not used.
46 AVdac In +5 V source for the internal DAC and ADC
47 DAOL Out Left channel sound waveform output
48 REFL Out Terminal for the internal DAC and ADC
49 AGdac In Ground source for the internal DAC
50 AGadc In Ground source for the internal ADC
51 ANI Not used. Connected to ground.
52 AVadc In +5 V source for the internal ADC
53 NC8 Not used.
54 MOD0 In Mode selection terminal. Connected to +5 V.
55, 56 MOD1, MOD2 In Mode selection terminal. Connected to ground.
57 P40 In APO cancellation signal
58 ~ 65 KI0/P30 ~ KI7/P37 In Terminals for key/button input signal
66 ~ 73 KO0/P50 ~ KO7/P57 Out Terminals for key scan signal
74 ~ 77 KO8/P20 ~ KO11/P23 Out Terminals for button input signal
78 NC9 Not used.
79 LVCC In +5 V source
80 ~ 95 LX0 ~ LX7, LY0 ~ LY7 Out LED drive signal
96 LGND In Ground source
97, 98 MA18, MA17 Not used.
99, 100 MA16, MA15 Out Address bus
CPU (LSI1: MSM6755B-07)
The CPU reads sound data from the ROM in accordance with the pressed key and the selected tone; the CPU
can read rhythm data simultaneously when a rhythm pattern is selected. Then it provides the left and the right
channels' waveforms separately, by converting the data into the waveforms with two built-in DACs. The CPU
also controls key input, button input and LED driving. The following table shows the pin functions of LSI1.
Vista de pagina 6
1 2 3 4 5 6 7 8 9 10 11 12 ... 20 21

Comentarios a estos manuales

Sin comentarios